Product Description:

It is a topcoat paint designed for painting PP/EPDM, PUR, PVC and other plastic surfaces (vehicle bumpers, side trim strips, body parts of plastic origin, etc.), which can be applied directly without the use of plastic adhesion primer underneath, allowing wet-on-wet painting.

 

Product Usage:

The application surfaces should be prepared, cleaned (from grease and dirt) and dried as recommended.

It should be thinned by 20-25% with cellulosic based thinners and applied in 2-3 single coats. Too thick application weakens adhesion. The recommended thickness is 45-50 microns. The assembly is allowed to dry after 60 minutes at room temperature.